Author: Braun, H.-H.
Paper Title Page
MOP004
Towards the Demonstration of Soft X-Ray Echo-Enabled Harmonic Generation at Fermi  
 
  • E. Allaria, R. Bracco, D. Castronovo, I. Cudin, M.B. Danailov, G. De Ninno, S. Di Mitri, B. Diviacco, W.M. Fawley, M. Ferianis, L. Giannessi, M. Lonza, G. Penco, P. Rebernik Ribič, E. Roussel, S. Spampinati, C. Spezzani, L. Sturari, M. Svandrlik, M. Veronese, R. Visintini, M. Zaccaria, D. Zangrando
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • H.-H. Braun, E. Prat, S. Reiche
    PSI, Villigen PSI, Switzerland
  • G. De Ninno
    University of Nova Gorica, Nova Gorica, Slovenia
  • B.W. Garcia, J.B. Hastings, E. Hemsing, T.O. Raubenheimer, G. Stupakov, J.J. Welch
    SLAC, Menlo Park, California, USA
  • G. Penn
    LBNL, Berkeley, California, USA
  • E. Roussel
    SOLEIL, Gif-sur-Yvette, France
  • A. Zholents
    ANL, Argonne, Illinois, USA
 
  The echo-enabled harmonic generation seeding scheme is based on an echo mechanism that develops in the electron beam phase-space interacting with two seed lasers before and after a strong dispersive region. It has been proposed for extending the capabilities of externally seeded free electron lasers to reach short wavelengths. After the original proposal, a few experiments have confirmed the capabilities of efficient bunching generation at very high harmonics. However, up to now none of the experiments demonstrated FEL amplification from high harmonic bunching produced at 10 nm wavelengths or shorter. In this work, we report about our plans for performing an EEHG experiment at FERMI. The experiment will be done at the FEL-2 line normally operated in the double stage high-gain harmonic generation configuration in the wavelength range 20-4 nm. After the modification of a few hardware components planned for the first semester of 2018, the FEL-2 layout will be suitable for EEHG at wavelengths down to approximately 6 nm.  
 
MOP038 Overview of the Soft X-Ray Line Athos at SwissFEL 1
 
  • R. Ganter, S. Bettoni, H.-H. Braun, M. Calvi, P. Craievich, R. Follath, C.H. Gough, F. Löhl, M. Paraliev, L. Patthey, M. Pedrozzi, E. Prat, S. Reiche, T. Schmidt, A.C. Zandonella
    PSI, Villigen PSI, Switzerland
 
  The Athos line will cover the photon energy range from 250 to 1900 eV and will operate parallel to the hard x-ray line Aramis of SwissFEL. Athos consists of fast kicker magnets, a dog-leg transfer line, a small linac and 16 APPLE undulators. The Athos undulators follow a new design: the so-called APPLE X design where the 4 magnet arrays can be moved radially in a symmetric way. Besides mechanical advantages of such a symmetric distribution of forces, this design allows for easy photon energy scans at a constant polarization or for the generation of transverse magnetic gradients. Another particularity of the Athos FEL line is the inclusion of a short magnetic chicane between every undulator segment. These chicanes will allow the FEL to operate in optical klystron mode, high-brightness SASE mode, or superradiance mode. A larger delay chicane will split the Athos line into two sections such that two colors can be produced with adjustable delay. Finally a post undulator transverse deflecting cavity will be the key tool for the commissioning of the FEL modes. The paper will present the current status of this four years project started in 2017.  
 
TUP053 The ACHIP Experimental Chambers at PSI 1
 
  • E. Ferrari, M. Bednarzik, S. Bettoni, S. Borrelli, H.-H. Braun, M. Calvi, Ch. David, M.M. Dehler, F. Frei, T. Garvey, V. Guzenko, N. Hiller, R. Ischebeck, C. Ozkan Loch, E. Prat, J. Raabe, S. Reiche, L. Rivkin, A. Romann, B. Sarafinov, V. Schlott, S. Susmita
    PSI, Villigen PSI, Switzerland
  • E. Ferrari, L. Rivkin
    EPFL, Lausanne, Switzerland
  • P. Hommelhoff
    University of Erlangen-Nuremberg, Erlangen, Germany
  • J.C. McNeur
    Friedrich-Alexander Universität Erlangen-Nuernberg, University Erlangen-Nuernberg LFTE, Erlangen, Germany
 
  Funding: Gordon and Betty Moore Foundation
The Accelerator on a Chip International Program (ACHIP) is an international collaboration, funded by the Gordon and Betty Moore Foundation, whose goal is to demonstrate that a laser-driven accelerator on a chip can be integrated to fully build an accelerator based on dielectric structures. PSI will provide access to the high brightness electron beam of SwissFEL to test structures, approaches and methods towards achieving the final goal of the project. In this contribution, we will describe the two interaction chambers installed on SwissFEL to perform the proof-of-principle experiments. In particular, we will present the positioning system for the samples, the magnets needed to focus the beam to sub-micrometer dimensions and the diagnostics to measure beam properties at the interaction point.
 
 
WEP040 Sub-Femtosecond Time-Resolved Measurements Based on a Variable Polarization X-Band Transverse Deflecting Structures for SwissFEL 1
 
  • P. Craievich, M. Bopp, H.-H. Braun, R. Ganter, M. Pedrozzi, E. Prat, S. Reiche, R. Zennaro
    PSI, Villigen PSI, Switzerland
  • R.W. Aßmann, F. Christie, R.T.P. D'Arcy, B. Marchetti, D. Marx
    DESY, Hamburg, Germany
  • N. Catalán Lasheras, A. Grudiev, G. McMonagle, W. Wuensch
    CERN, Geneva, Switzerland
 
  The SwissFEL project, under commissioning at the Paul Scherrer Institut (PSI), will produce FEL radiation for soft and hard X-rays with pulse durations ranging from a few to several tens of femtoseconds. A collaboration between DESY, PSI and CERN has been established with the aim of developing and building an advanced X-Band transverse deflector structure (TDS) with the new feature of providing variable polarization of the deflecting force. As this innovative CERN design requires very high manufacturing precision to guarantee highest azimuthal symmetry of the structure to avoid the deterioration of the polarization of the streaking field, the high-precision tuning-free assembly procedures developed at PSI for the SwissFEL C-band accelerating structures will be used for the manufacturing. Such a TDS will be installed downstream of the undulators of the soft X-ray beamline of SwissFEL and thanks to the variable polarization of the TDS, it will be possible to perform a complete characterization of the 6D phase-space. We summarize in this work the status of the project and its main technical parameters.